February 16, 2022
-
Supports
Technical Support Email
support@innovativeelectronics.com
If you have trouble on the usage of our products (except for DT-51 Trainer Kit)tutorial51@innovativeelectronics.com
If you have trouble on the usage of our DT-51 Trainer Kit productsiewebmaster@innovativeelectronics.com
If you have any feedback relating to the IE Website Design -
Technical Support Email
support@innovativeelectronics.com
If you have trouble on the usage of our products (except for DT-51 Trainer Kit)tutorial51@innovativeelectronics.com
If you have trouble on the usage of our DT-51 Trainer Kit productsiewebmaster@innovativeelectronics.com
If you have any feedback relating to the IE Website Design
DT-I/O Analog Input/Output
DT-I/O product
*) DISCONTINUE
DT-I/O Analog Input/Output is a ADC and DAC module which uses ADC0809CCN as the ADC and TLC5628CB as the DAC. DT-I/O Analog Input/Output can be used to convert digital data to the analog dan vice versa. This module is well suited for temperature controller, speed motor controller, robotics, etc.
This module fully compatible with DT-51 Low Cost Series and DT-AVR Low Cost Series. Also fully compatible with DT-51 Minimum System Ver 3..3, DT-51 PetraFuz, DT-BASIC Series and another microncontroller board.
Dimension : 8,6 cm (L) x 5,9 cm (W) x 1,5 cm (H)
- Product Detail
- Download
- Application Note
Specifications :
- 8 channel 8-bit Analog to Digital Converter (ADC) :
- Range input analog 0 - 5 Volt.
- Convertion time : 100 µs.
- Maximum error : ±1 LSB.
- Parallel interface (TTL compatible)
- Stand alone mode.
- Selectable hardware address by jumper configuration.
- 8 channel 8-bit Voltage Output Digital to Analog Converter (DAC):
- Programable range output analog : 1x or 2x (0 - 2,5 Volt or 0 - 5 Volt)
- Settling Time 10 ms.
- Linearity error maksimum ±1 LSB.
- Serial Interface.
- 5VDC voltage input.
- Comes with example code for DT-51 Low Cost Series and DT-AVR Low Cost Series in BASIC programming language and C programming language.
Includes :
- 1x DT-I/O Analog Input/Output board.
Application Note Table
| Article | File | Desc | date |
|---|---|---|---|
| |
AN132.zip | [AN132] BASIC Analog I/OThis application note will explain how to use DT-I/O Analog Input/Output with microcontroller. This application note uses DT-I/O Analog Input/Output and DT-BASIC Mini System as microcontroller module. |
25-04-2014 |
| |
AN129.zip | [AN129] Menghubungkan Analog I/O ke Komputer Melalui Serial PPIThis application note will explain how a computer can read/write analog voltage to external circuits. This application note uses PC-Link Serial PPI and DT-I/O Analog Input/Output. |
14-09-2016 |
Raspberry Pi Home Remote App Kit
June 05, 2018
April 12, 2017
April 12, 2017
June 02, 2016
June 02, 2016
June 02, 2016
April 27, 2016
