February 16, 2022
-
Supports
Technical Support Email
support@innovativeelectronics.com
If you have trouble on the usage of our products (except for DT-51 Trainer Kit)tutorial51@innovativeelectronics.com
If you have trouble on the usage of our DT-51 Trainer Kit productsiewebmaster@innovativeelectronics.com
If you have any feedback relating to the IE Website Design -
Technical Support Email
support@innovativeelectronics.com
If you have trouble on the usage of our products (except for DT-51 Trainer Kit)tutorial51@innovativeelectronics.com
If you have trouble on the usage of our DT-51 Trainer Kit productsiewebmaster@innovativeelectronics.com
If you have any feedback relating to the IE Website Design
DT-I/O TCP/IP TO UART CONVERTER
DT-I/O product
*) DISCONTINUE
DT-I/O TCP/IP TO UART CONVERTER is a 2 way converter module for UART and ethernet which based on WIZ105SR. This module can be used as TTL to ethernet, RS-232 to ethernet or RS-485 to ethernet converter. This module is well suited for system which needs to be connected to ethernet network.
Dimension : 8,4 cm (L) x 6,4 cm (W) x 3,7 cm (H)
- Product Detail
- Download
- Application Note
Spesifikasi :
- Based on WIZ105SR (Serial to Ethernet Gateway).
- Based on W5100 and GC89L591A0-MQ44I.
- TCP, UDP, IP, ARP, ICMP, MAC, PPPoE protocol support.
- Auto sensing 10/100 Base-T ethernet.
- Auto MDI/MDIX.
- MAG JACK to connect your LAN cable.
- UART TTL 3,3V interface.
- Up to 230 kbpstransfer rate .
- UART configuration for WIZ105SR can be done using Configuration Tool WIZ105SR software.
- Baudrate : 1200 bps-230 kbps.
- Data : 7 atau 8 bit.
- Parity : none, even, odd.
- Flow Control : none, Xon/Xoff, CTS/RTS.
- UART RS-485 doesn't have flow control CTS/RTS.
- 3 conversion mode : UART TTL to ethernet, UART RS-232 to ethernet and UART RS-485 to ethernet.
- Comes with 3.3V to 5 V level shifter circuits for UART TTL interface.
- 3 pin blue connectors for RS-485 (COM, D+, D-) which makes cable instalation easier.
- Reset button for refreshing client-server connection.
- Factory reset button which can be used to resotore factory setting (default).
- Header pin for client-server connection indicator.
- 5 VDC supply input through 2 pins blue terminal.
- Compatible with DT-AVR Low Cost series or other microcontroller system.
- Comes with Configuration Tool WIZ105SR software, datasheet, manual, teter code, and schematic.
Includes :
- 1x DT-I/O TCP/IP TO UART CONVERTER.
- 1x serial cable (±120 cm).
- 1x LAN cable with crossover configuration (p = ±120 cm).
Application Note Table
| Article | File | Desc | date |
|---|---|---|---|
| |
AN211.zip | [AN211] Pemantuan Suhu Melalui Koneksi TCP/IPThis application note will explain how to build a temperature monitoring through TCP/IP. This application note uses DT-Sense Temperature Sensor and DT-I/O TCP/IP to UART Converter. |
28-04-2014 |
| |
AN204.zip | [AN204] Automatic Relay Control Based Google CalendarThis application note will explain how to build an automatic relay control based system. This application note uses DT-I/O TCP/IP To UART Converter, DT-AVR ATMEGA128L Bootloader Micro System, DT-I/O I2C Peripheral, and DT-I/O Relay Board Ver 2.0-1201 |
28-04-2014 |
| |
AN194.zip | [AN194] Desktop Based Pressure and Temperature Monitoring via TCP/IPThis application note will explain how to build a desktop based pressure and temperature monitoring system. This application note uses DT-AVR Low Cost Micro System, DT-I/O TCP/IP to UART Converter, and DT-SENSE Barometric Pressure & Temperature Sensor. |
28-04-2014 |
| |
AN193.zip | [AN193] Pressure and Temperature Monitoring via TCP/IPThis application note will explain how to build a pressure and temperature monitoring system through TCP/IP communication. This application note uses DT-AVR Low Cost Micro System, DT-I/O TCP/IP to UART Converter, DT-SENSE Barometric Pressure & Temperature Sensor, and 1x EMS LCD Display. |
28-04-2014 |
| |
AN192.zip | [AN192] Web Based Temperature Monitoring SystemThis application note will explain how to build web based temperature monitoring system. This application note uses DT-AVR Low Cost Micro System, DT-Sense Temperature Sensor, and DT-I/O TCP/IP to UART Converter. |
28-04-2014 |
Raspberry Pi Home Remote App Kit
June 05, 2018
April 12, 2017
April 12, 2017
June 02, 2016
June 02, 2016
June 02, 2016
April 27, 2016
