DT-Sense Thermopile Array Sensor

Specifications:

• Can measure the temperature of an object by measuring range 0 ° C to 100 ° c.
• Operate at room temperatures of 0 ° C – 60 ° C.
• The Sensor does not need to be direct contact with the object being measured.
• Thermopile array sensor accuracy ± 2 ° c.
• Output in the form of digital data that has shown the value of temperature in units of ° c.
• Visibility sensor thermopile 41 ° x 6 ° (8 per pixel).
• There are 8 thermopile sensor channel, as well as a thermistor to measure the temperature of the room.
• Able to detect fire or a candle bulb 15W of heat in a room temperature of 20 ° C at a maximum distance of 200 cm from the eye sensor.
• Need power supply power supply 4, 8V-5, 4V DC or 9V-12V DC (via on-board regulator).
• Equipped with an indicator of power and voltage polarity protection.
• Line Input/Output compatible with TTL and CMOS voltage levels.
• Equipped with a TTL UART interface (38400bps) and I ² C (bit rates up to 100 kHz).
• There are 2 connectors for standard servo motor that can be used to process the autoscan and expansion areas reading of the sensor.
• You can cascade up to 8 modules in one line I ² c.
• Terminal for the SCL and SDA will simplify the process of cascade module for I ² c.
• The sensor module is separate from the main module so that the placement of the sensors can be more flexible.
• There is a sample program using the CodeVisionAVR.

Includes:

• 1x DT-SENSE Thermopile Sensor Array.
• 1x Sensor Cable along with the Thermopile ± 50 cm.
• 1x Quick Start.
• 1x DVD.