Bahasa Indonesia English Language

Propeller Education Kit

PARALLAX product

PropStick USB Version :

A complete kit with everything you’ll need to get started with the 8-cog multi-processing Propeller microcontroller and PE Labs, except a 9V battery.

With its 8 parallel-processsing cogs, the Propeller chip’s unique design makes a variety of otherwise difficult microcontroller applications relatively simple. This kit features the PropStick USB, with built-in Propeller chip, EEPROM, regulator, crystal and programming connections so your project can get up and running with minimal wiring time. The Propeller Education Kit – 40-Pin DIP Version is also available.

This kit features the PropStick USB, with built-in Propeller chip, EEPROM, regulator, crystal and programming connections so your project can get up and running with minimal wiring time. The Propeller Education Kit – 40-Pin DIP Version is also available.

 

40-pin DIP version :

With its 8 parallel-processsing cogs, the Propeller chip’s unique design makes a variety of otherwise difficult microcontroller applications relatively simple. This kit features breadboard-friendly versions of the Propeller chip, EEPROM and other core components making it easy and inexpensive for students to experiment while being able replace parts as needed.

  • Product Detail
  • Download
  • Application Note

PropStick USB Version kit contents:

  • 1 - Propeller Education Kit Labs: Fundamentals Text (#122-32305)
  • 1 - Plastic Box with Compartments (#110-32305)
  • 1 - Propeller Plug with USB cable (#32201)
  • 1 - 100 ohm Resistor, 1/4 watt (#150-01011)
  • 1 - 1000 µF Capacitor, 6.3 V, electrolytic (#201-01085)
  • 1 - 0.47 µF Capacitor, 25 V, electrolytic (#201-04740)
  • 1 - PropStick USB (#32210)
  • 1 - Green LED (#350-00001)
  • 1 - 2-pin m/m header (cut down from 36)    (#451-03601)
  • 1 - 9 V battery clip with 2-pin female header    (#571-32305)
  • 1 - 5 Volt Regulator (#601-00506)
  • 5 - 3" Jumper Wires, bag of 10 (#800-00016)
  • 1 - PE Project Parts Kit (#130-32000)        
  • 1 - Breadboard Set (#700-32305)

 

40-pin DIP version kit contents:

  • 1 - Propeller Education Kit Labs: Fundamentals Text    (#122-32305)
  • 1 - Plastic Box with Compartments (#110-32305)
  • 1 - Propeller Plug with USB cable (#32201)
  • 1 - Propeller DIP Pin Map Label (#120-00003)
  • 1 - 100 ohm Resistor, 1/4 watt (#150-01011)
  • 1 - 10 k-ohm Resistor, 1/4 watt (#150-01030)
  • 2 - 1000 µF Capacitor, 6.3 V, electrolytic (#201-01085)
  • 1 - 0.47 µF Capacitor, 25 V, electrolytic (#201-04740)
  • 1 - Crystal Oscillator, 5 MHz, 20 pF (#251-05000)
  • 1 - Green LED (#350-00001)
  • 1 - Pushbutton, normally open (#400-00002)
  • 1 - 4-pin right-angle header, SIP 0.1" (#451-00406)
  • 1 - 2-pin male/male header (cut down from 36) (#451-03601)
  • 1 - 9 V battery clip with 2-pin female header (#571-32305)
  • 1 - 5 Volt Regulator (#601-00506)
  • 1 - 3.3 Volt Regulator (#601-00513)
  • 1 - 32K EEPROM, 8-pin DIP (#602-00032)
  • 6 - 3" Jumper Wires, bag of 10 (#800-00016)
  • 1 - Propeller microcontroller chip, 40-pin DIP (#P8X32A-D40)
  • 1 - PE Project Parts Kit (#130-32000)        
  • 1 - Breadboard Set (#700-32305)

Download All File

Application Note Table

Article File Desc date
No data available in table

  Where to buy

Latest Product

Arduino Sensor Training Kit

February 16, 2022

Raspberry Pi Home Remote App Kit

June 05, 2018

EMS Basic Interface Shield

April 12, 2017

DT-AVR Uno R3

April 12, 2017

Basic Arduino

June 02, 2016

EMS Basic I/O Shield

June 02, 2016

EMS Relay Shield

June 02, 2016

DT-Robot Tank Shield

April 27, 2016

Supports

Company Info

 

Follow Us

Copyright © 2013 Innovative Electronics. All Right Reserved.