WizFi630-EVB

Specifications :

• Based on WizFi630.
• Compatible with LAN IEEE802.11b/g/n.
• Support protocol : TCP, UDP, ARP, ICMP, DHCP, PPPoE and HTTP.
• Operation modes : Access Point(Bridge), Client(Station), Gateway, AP-Client and ad-hoc.
• Data rate transfer : up to 150 Mbps.
• Support : WEP 64/128bit, WPA/WPA2-PSK AES/TKIP dan 802.1x.
• Module configuration can be done through Web Configuration, Serial Command, or Configuration Tool.
• 1T1R antenna configuration with u.FL connector.
• Modulation :
  • 11g: OFDM(64QAM, 16QAM, QPSK, BPSK).
  • 11b: DSS(CCK, DQPSK, DBPSK).
• Sensitivity :
  • 802.11b: -89dBm@11Mbps.
  • 802.11g: -74dBm@54Mbps.
  • 802.11n(40MHz): -66dBm@150Mbps.
  • 802.11n(20MHz): -70dBm@72Mbps.
• Comes with :
  • 3 Ethernet ports.
  • 2 RS-232 ports.
  • 1 USB port.
• Serial communication :
  • Baud Rate: 1200 ~ 921,600bps.
  • Stop bits: 1, 2.
  • Parity: None, Odd, Even.
  • Flow Control:
    • UART1: XON/XOFF(software), CTS/RTS(hardware), none.
    • UART2: XON/XOFF, none.
• Nine LEDs as indikator and two push button for accessing ESP and reset.
• Working voltage : 5 VDC.

Includes :

• 1 x WiFi630-EVB Base board.
• 1 x WizFi630.
• 1 x RS-232 cable.
• 1 x Ethernet cable.
• 1 x Antena.
• 1 x Power Supply (5V, 2A).