DT-51 AT89C51ID2 CPU Module

Specifications :

• Based on AT89C51ID2 and provides the following features :       
  • 64 Kbytes flash memory.
  • 256 bytes Scratch Pad RAM.
  • 2 Kbytes EEPROM.
  • On-chip 1792 bytes Expanded RAM.
  • 6 clock/machine cycle on X2 mode.
  • 10 Interrupt Sources with 4 Priority Levels.
  • Three 16-bit Timer/Counters
  • Dual Data Pointer.
  • Five 16-bit PCA for PWM
  • Watchdog Timer.
• 11,0592 MHz Crystal oscillator.
• Equipped with internal bootloader from ATMEL (default bootloader) to assist In-System Programming process through UART interface without additional external programmer device.
• Up to 32 pins Input/Output.
• Comes with interfaces:
  • Full Duplex Enhanced UART with dedicated Internal Baud Rate Generator.
  • Master/Salve SPI interface.
  • Two Wire Interface 400K bit/s
  • In-System Programmer process uses a FLIP (Flexible In-System Programmer) software from ATMEL.
  • Equipped with PLCC socket so making it easy to change the IC in the event of damage.
  • Equipped with HWB tactile switch to assist programming using bootloader.
  • Equipped with EMI Filter chip to minimize noise from power supply.
  • 2,7 – 5,5VDC Power Supply and comes with LED power indicator.
  • Compatible with DT-COMBO Basic Base Board and can be used with another module with pay attention to pin configuration.
  • Comes with BASCOM-8051 demo version software and FLIP. 

Includes:   

• 1x DT-51 AT89C51ID2 board.
• DVD product, consist of product manual, electronic circuit schematic, datasheet, BASCOM-8051