Bahasa Indonesia English Language
*) DISCONTINUE

PC-Link USB Smart I/O is a smart cotnroller module which can be connected and controlled through USB port. This module will be detected as vritual com on PC. This module is well suited for application relay or LED controller, analog signal reader, switch state reader, pulse counter reader. Moreover this module can be connected to the external module through UART or I2C interface (GSM serial modem, GPS receiver, sensor, RTC, EEPROM, etc). Available several example code with GUI on windows.

Dimension : 7,2 cm (L) x 6,8 cm (W) x 1,5 cm (H)

  • Product Detail
  • Download
  • Application Note

Specifications :

  • Uses USb interface and will be detected as virtual com with 8n1 configuration.
  • Auto baudrate (110 - 256000 bps).
  • Available eight analog pin which can be used as :
    • Analog input (Analog to Digital Converter or ADC)
    • Digital output or digital input (with or without resistor pull-up internal).
  • Comes with eight digital  pin which can be used as :
    • Digital output or digital input (with or without resistor pull-up internal).
  • Comes with 5-pin general purposes which can be used as :
    • Digital output or digital input (with or without resistor pull-up internal).
  • Available 8-bit DAC (Digital to Analog Converter) with rail-to-rail feature (0 – ±5,1 VDC).
  • Comes with 30-400kHz I2C interface (as master).
  • 35 byte transmiiter buffer and 32 byte for receiver buffer for I2C interface.
  • Available UART interface in several type :
    • TTL (halfduplex)
    • RS232 (half-duplex)
    • RS485 (half-duplex)
    • Baudrate: 9600, 19200, 38400, or 57600 bps.
  • 32 byte transmitter and receiver buffer.
  • 6,5VDC - 12VDC input voltage.
  • Comes with 5VDC/800mA internal regulator

 

Includes :

  • 1x PC-Link USB Smart I/O.
  • 1x USB cable.

Application Note Table

Article File Desc date
AN202.pdf AN202.zip
[AN202] GUI Analog Output (DAC) PC-Link USB Smart I/O

This application note will explain how make a GUI software for accessing PC-Link USB Smart I/O's analog output.

17-06-2015
AN201.pdf AN201.zip
[AN201] GUI Analog Input PC-Link USB Smart I/O

This application note will explain how to make a GUI software for accessing PC-Link USB Smart I/O's analog input.

17-06-2015
AN200.pdf AN200.zip
[AN200] GUI Digital Input dan Output PC-Link USB Smart I/O

This application note will explain how make a GUI software for accessing PC-Link USB Smart I/O's digital I/O.

28-04-2014