Specifications:
- Based on AT89C51ID2 which has features as:
- 64 kBytes flash memory
- 3x 16-bit Timer/Counter
- 256 Bytes scratch pad RAM
- 10 interrupt sources
- Dual data pointer
- 2-wire interface (up to 400 kbit/s)
- x2 mode for faster processing time (1 machine cycle = 6 clock)
- Low power (2,7 VDC - 5,5 VDC)
- This module supports another microcontroller types such as:
- AT89C51IC2
- AT89C51RD2
- AT89C51RB2
- AT89C51ED2
- AT89C51RC2
- AT89C51RE2
- Microcontroller mentioned above has beed equiped with bootloader
- PLCC socket for microcontroller placement
- 32 I/O pins
- Integrated with 11,0592 MHz External Oscillator
- Comes with bootloader, therefore In-System Programming can be done though UART communication
- You will need Atmel's FLIP software to burn your program using bootloader from computer
- In-System Programming can be done through USB or UART RS-232 (RJ45 connector)
- Doesn't need external programmer device
- Integrated with additional circuit to managing bootloader mode from FLIP
- RS-232 and USB interface (through USB to Serial Converter) available
- Integrated with reset switch for manual reset
- Two selection of power supply input, 6 - 12 VDC (through on-board regulator), or 3,3 - 5 VDC (without regulator)
- Two selection for regulator output, 3,3 VDC or 5 VDC
- Output voltage terminal is available.
Includes:
- 1x DT-51 AT89C51XXX BOOTLOADER MICRO SYSTEM
- 1x mini USB cable (±120 cm)
- 1x mini USB cable
- 1x CD/DVD-ROM that contains datasheet, H2U (how to use), manual, schematic, and Innovative Electronics' website
Article |
File |
Desc |
date |
AN166.pdf
|
|
[AN166] How to Use DT-51 AT89C51XXX BMSThis application note will explain how to use DT-51 AT89C51XXX Bootloader Micro System. |
28-04-2014 |