Bahasa Indonesia English Language

WizFi210-EVB - Evaluation Board for WizFi210 module

- Bring WiFi connectivity via Serial Host Interface
- Quick Booting Time : under 20msec
- Ultra Low Power through Dynamic Power Management (34μA at the Standby mode)
- Operates with standard 802.11b/g/n access point at speed up to11Mbps (802.11b)
- Security Protocol : WEP, WPA/WPA2-PSK, Enterprise EAP-FAST, EAP-TLS, EAP-TTLS, PEAP
- Operation Temperature : -40℃ ~ 85℃
- Compact Size : 32 x 23.5 x 2.9 (mm)
- CE, FCC, KCC Certified

 

WizFi220-EVB  Evaluation Board for WizFi210 module

- Bring WiFi connectivity via Serial Host Interface
- Quick Booting Time : under 20msec
- Ultra Low Power through Dynamic Power Management (34μA at the Standby mode)
- Operates with standard 802.11b/g/n access point at speed up to11Mbps (802.11b)
- Security Protocol : WEP, WPA/WPA2-PSK, Enterprise (EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)
- Operation Temperature : -40℃ ~ 85℃
- Compact Size : 32 x 23.5 x 2.9 (mm)
- CE, FCC, KCC Certified

  • Product Detail
  • Download
  • Application Note

WizFi210-EVB :

Specifications
Description
Radio Protocol
IEEE 802.11b/g/n Compatible
Supported Data Rates
11, 5.5, 2, 1 Mbps (IEEE 802.11b)
Modulation
DSSS and CCK
RF Operating Frequency
2.4 - 2.497 GHz
Antenna Options
Chip antenna and U.FL connector for external antenna
Networking Protocols
UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(**)
Power Consumption
(Typical)
Standby = 34.0 μA
Receive = 125.0 mA
Transmit = 135.0 mA
RF Output Power (Typical)
8dBm ± 1dBm
Security Protocols
WEP, WPA/WPA2?PSK, Enterprise (EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)(**)
I/O Interface
UART, SPI(**), I2C(*), WAKE, ALARM, GPIOs
Power Source
3.3V
Dimensions
32 x 23.5 x 3 mm

 (*) is supported by software customizing
 (**) is supported by dedicated firmware

 

WizFi220-EVB :

Specifications
Description
Radio Protocol
IEEE 802.11b/g/n Compatible
Supported Data Rates
11, 5.5, 2, 1 Mbps (IEEE 802.11b)
Modulation
DSSS and CCK
RF Operating Frequency
2.4 - 2.497 GHz
Antenna Options
Chip antenna and U.FL connector for external antenna
Networking Protocols
UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(**)
Power Consumption
(Typical)
Standby = 34.0 μA
Receive = 125.0 mA
Transmit = 290 mA
RF Output Power (Typical)
17dBm ± 1.5dBm
Security Protocols
WEP, WPA/WPA2?PSK, Enterprise, EAP-FAST, EAP-TLS, EAP-TTLS, PEAP(**)
I/O Interface
UART, SPI(**), I2C(*), WAKE, ALARM, GPIOs
Power Source
3.3V
Dimensions
32 x 23.5 x 3 mm

(*) is supported by software customizing
(**) is supported by dedicated firmware

Application Note Table

Article File Desc date
AN179.pdf AN179.zip
[AN179] Wireless IP Printer II

This application note will explain how to build a wireless IP printer. This application note uses WIZFI210 Evaluation Board.

28-04-2014
AN178.pdf AN178.zip
[AN178] Wireless IP Printer I

This application note will explain how to build a wireless IP printer. This application note uses WIZFI210 Evaluation Board.

28-04-2014