DT-COMBO AVR-51 STARTER KIT

Specifications :

• 9 - 12 Volt DC input voltage through DC jack, power switch, and voltage regulator.
• 8x2 character LCD (HD44780 compatible controller) which is accessible through 7x2 header.
• 8 SMD LEDs with active low configuration (lights up with low level output) that can be used as output.
• 8 tactile switches with active low configuration (gives low level input when pressed) that can be used as input.
• LEDs and tactile switches are accessible through 5x2 header or 20-pin SIP socket machine.
• Up to 35 I/O lines which are accessible through five 5x2 header or two 20-pin SIP socket machine.
• Reset circuit with external brown-out detector and switch for manual reset.
• ISP programming header for AVR®(AT90S1200, AT90S2313, AT90S8515, AT90S8535, ATtiny2313*, ATmega8515, ATmega8535, ATmega16, ATmega162) and MCS-51® (AT89S51, AT89S52, AT89S53, AT89S8252).
• Can be used for microcontroller which has no ISP feature such as: AT89C1051, AT89C2051, AT89C4051, AT89C51, AT89C52, AT89C55.
• Comes with LED as indicator for AVR®ISP programming.
• Crystal socket for configurable oscillator frequency.
• 2 RS-232 communication port to communicate with computer or other module.
• Configuration jumper for ADC voltage reference selection, and variable resistor for adjusting the voltage reference value (this feature is for AVR® microcontroller which has internal ADC).
• 390 dots project board.
• Two layers industrial standard PCB.
• Comes with demo version of CodeVisionAVR©, demo version of BASCOM-8051©, ASM-51© assembler, and Atmel Microcontroller ISP Software©.

Includes :

• 1 x DT-COMBO AVR-51 STARTER KIT.
• 1x set of connector cable.
• 1x set of serial cable.