Bahasa Indonesia English Language

DT-PROTO 8 Pin AVR merupakan proto board berbasis ATtiny13 yang mendukung fitur In-system Programming. Tersedia pad array untuk rangkaian tambahan / aplikasi. Modul ini cocok untuk bereksperimen, membuat prototipe produk, atau membuat aplikasi single chip yang sederhana. Misalnya aplikasi pengendali tampilan LED, pengendali driver motor, pengendali gerak robot, pembaca sensor digital maupun sensor analog.

Dimensi : 9.1 cm (P) x 6 cm (L) x 2.2 cm (T)

  • Product Detail
  • Download
  • Application Note

Spesifikasi :

  • Based on ATtiny13 which has 1K byte Flash memory, 64 byte EEPROM, 64 byte SRAM, dan 4 channel ADC with 10-bit resolution.
  • Support another 8-pin AVR variants such as : ATtiny11, ATtiny12, ATtiny15L, AT90(L)S2343, AT90(L)S2323 dan ATtiny22L.
  • 6 I/O lines.
  • 9 - 12 VDC supply input, and there is +5 V voltage output for external circuit.
  • There is LED as indicator and 5x2 in-system programming header (Atmel standard).
  • External reset circuit with brown-out detector and manual reset button.
  • There is jumpuer for reset source configuration.
  • 434 through-hole pads for external circuits (pitch=0.1").
  • 3 pad lines which each of which 
  • There are 3 lines of pad which each of which is connected to each other. You can use them for power supply line (VIN, GND, +5V) or other purpose.
  • Comes with tester software to test port B.


Includes :

  • 1x DT-PROTO 8 Pin AVR.
  • 1x Quick start.
  • 1x CD.

Application Note Table

Article File Desc date
No data available in table