Bahasa Indonesia English Language
*) DISCONTINUE

SPC Neo DC Motor 2.4 is a DC motor controller module with the capability to control DC motor using PWM (Pulse Width Mudulation) methode. This module has several option of PWM Frequency and provide I2C interface dan UART TTL interface to communicate to the external module.

Dimension : 6 cm (L) x 3 cm (W) x 1,8 cm (H)

  • Product Detail
  • Download
  • Application Note

Specifications :

  • Can be used to control the direction and speed of two DC motor.
  • Uses PWM mothode to controlling the DC Motor. Provide several option of PWM Frequency : 21,68 kHz, 2,71 kHz (default), 338,8 Hz, and 84,7 Hz.
  • Full H-Bridge motor driver based on A3995.
  • Maximum drain current for each channel up to 2,4 Ampere.
  • 4,8VDC - 36VDC for module input voltage
  • 8V - 36V for motor input voltage.
  • Comes two interface option :
    • UART TTL, baudrate 38400 bps, 8 databit, 1 stopbit, and no flow control.
    • I2C, slave configuration and bit rate up to 50 kHz.
  • Can be cascade up to 8 module on one I2C Bus.
  • I2C address selection by software and available eight option of I2C address.
  • 16-pin DIP 600mil connector to be connected to the external circuit or can be connected to the breadboard or proto board directly.
  • Comes with 2 LED to monitoring the DC motor
  • Comes with example code to uses UART TTL and I2C interface.

 

Includes :

  • 1x SPC Neo DC Motor 2.4A board.

Application Note Table

Article File Desc date
No data available in table