SPC Neo Stepper Motor 2.4A

Specifications :

• Based on ATtiny2313 as the main controller for driver motor.
• Based on A3995 as the driver motor, so does not need additional driver motor.
• Range input voltage DC motor from 8VDC to 36VDC, and maximum current up to 2,4A.
• Half step or full step.
• Need external controller as the input command.
• Fully compatible with DT-51 Series, DT-AVR Series, DT-Basic Series or DT-ARM Series.
• Provide 2 interface option to communicate to the external controller (UART TTL or I2C)
• Provide several action : Continuous Run, Pulse Count, Run, Brake and Stop.
• 4,8VDC - 5,4VDC input voltage.
• TTL/CMOS I/O compatible.
• Only uses 2 pins to communicate to the external controller, UART TTL (Tx and Rx) and I2C (SDA and SCL).
• Can be cascade up tp eight module using I2C interface.
• I2C address selection by software (just only for UART TTL inteface).
• 16-pin DIP 600mil, so can be connected to the breadboard or protoboard directly.

Includes :

• 1x SPC Neo Stepper Motor 2.4A board.