Bahasa Indonesia English Language
*) DISCONTINUE

SPC Low Cost Serial OLED is a OLED controller module which can be controlled through serial communication. Serial interface give more simplicity and brevity instead of parallel interface. This module has been equipped with 5VDC and 3,3VDC internal votlage regulator which allows to be connected to the OLED character or LED display directly.

SPC Low Serial OLED  can be connected to the PC or various type of microcontroller through serial interface. This module is well suited for many application, including character display, counter display, time display, etc.

Dimensi : 6,3 cm (L) x 3,55 cm (W) x 2,3 cm (H)

  • Product Detail
  • Download
  • Application Note

Specifications :

  • based on ATtiny 2313 'SPC' Smart controller.
  • 18-pin Male PCB Header for OLED Character module.
  • Fully compatible up to  40x2 OLED Character Module which used HD44780 driver or compatible.
  • Fully compatible with LCD module.
  • Various type OLED or LCD Character which is supported with SPC Low Cost Serial OLED :
    • OLED 16 x 2
    • LCD 8 x 2 , without backlight
    • LCD 16 x 2 , with backlight
    • LCD 20 x 2 , with backlight
    • LCD 20 x 2 Large, with backlight
    • LCD 20 x 4 , with backlight
    • LCD 24 x 2 , with backlight
    • LCD 40 x 2 , with backlight
  • Comes with on-board buzzer for tone output which can be controlled through UART interface.
  • Available variable resistor on-board for LCD contrast.
  • Small and compact PCB design.
  • 6,5VDC - 12VDC input voltage.
  • Comes with 5VDC and 3,3VDC voltage regulator on-board.

 

Comparison table between SPC Serial LCD and SPC Low Cost Serial LCD/OLED

Comparison
SPC Serial LCD Board Only
SPC Low Cost Serial OLED
Interface I2C Synchronous Serial-TTL UART
(TTL and RS-232)
UART (TTL and RS-232)
Supported LCD type LCD 8 x 2 , without backlight
LCD 16 x 2 , with backlight
LCD 20 x 2 , with backlight
LCD 20 x 2 Large , with backlight
LCD 20 x 4 , with backlight
LCD 24 x 2 , with backlight
LCD 40 x 2 , with backlight

OLED 16 x2
LCD 8 x 2 , withput backlight
LCD 16 x 2 , with backlight
LCD 20 x 2 , with backlight
LCD 20 x 2 Large , with backlight
LCD 20 x 4 , with backlight
LCD 24 x 2 , with backlight
LCD 40 x 2 , with backlight

Buzzer connector only on-board
Regulator 5VDC 5VDC or 3,3V DC by jumper configuration
Dimension 9,9cm (L) x 3,6cm (W) x 3,7cm (H) 6,3 cm (L) x 3,55 cm (W) x 2,3 cm (H)
Port / Display module connector 1 port : 2 x 8 male header
1 port : 1 x 16 header
1 port : 2 x 8 male header with 1x16 converter cable.
Display module
Not included
Included
Cascade capability
up to 8 buah modul by I2C interface
no

 

Includes :

  • 1x SPC Low Cost Serial OLED board.
  • 1x OLED Character 16x2 board.
  • Serial cable.
  • Display module cable.
  • 1x DVD, consit of manual, circuit diagram, testing procedure , supported software, and offlline website.

XX

Application Note Table

Article File Desc date
No data available in table