Bahasa Indonesia English Language
*) DISCONTINUE

Begin Serial Number 51.96.070, DT-AVR INODUINO has a compatibility with Arduino IDE 1.0.1 because the firmware on DT-AVR Inodunio has been changed. (Arduino IDE 1.0.1 which has compatibility with DT-AVR INODUINO has been included on DVD). How to use Arduino IDE 1.0.1 on DT-AVR INODUINO can be seen in this article.

DT-AVR INODUINO is a microcontroler module based on AT90USB1286 which has compatibility with Ardunio™. Uses high quality SMD components, so this module has compact size and has compatibility with various type of Arduino Shield. Moreover, this module has equipped with internal bootloader to downloading code using Arduino IDE software.

DT-AVR INODUINO has been equipped with 5VDC and 3,3VDC internal voltage regulator, so this module can be connected to various type of Arduino Shield which using 3,3V or 5V power supply. Beside that, this module has equipped with USB port for downloading programing code or serial communication (virtual comport).

Dimension : 10,8 cm (L) x 5,35 cm (H) x 1,5 cm (W)

  • Product Detail
  • Download
  • Application Note

Specifications :

  • Based on AT90USB1286 (128 KB Flash Memory (4 KB bootloader), 4 KB EEPROM and 8 KB SRAM).

    • Two 8-bit Timer/Counter, two 16-bit Timer/Counter and one 10-bit high speed timer/counter.

    • Four 8-bit PWM, Six 16-bit PWM.

    • Eight 10-bitADC.

    • One USART and UART, SPI, I2C, JTAG, USB device.

    • Watchdog timer, analog comparator.

  • 39 I/O (Digital+PWM+Eight ADC) pin out through Female PCB Header.

  • 16MHz Cystal Oscillator.

  • downloading code can be done through ISP Port or USB port (bootloader).

  • downloading code using USB Port (bootloader) does not need additional programmer device, such as DT-HiQ AVR In System Programmer, DT-HiQ AVR USB ISP or DT-HiQ AVR-51 USB ISP.

  • Fully compatible with various type of Arduino Shield.

  • The bootloader has a compatibility with Arduino, so user can use Arduino IDE as compile and downloader sotfware.

  • downloading code through ISP Port using DT-HiQ AVR In System Programmer, DT-HiQ AVR USB ISP or DT-HiQ AVR-51 USB ISP will delete bootloader code on microcontroller, so bootloader feature can not be used.

  • 6,5VDC – 12VDC power supply.

  • 5VDC dan 3,3VDC internal voltage regulator.

  • Equipped with EMI filter chip to minimize noise from power supply.

 

Includes :

  • 1x DT-AVR Inoduino board.

  • USB cable.

  • 1x DVD consist of manual, circuit schematic, testing procedure, supported software, and Innovative Electronics offline web.

Application Note Table

Article File Desc date
AN218.pdf AN218.zip
[AN218] Tampilan Grafik pada OLED Character 2x16

This application note will explain how to display a picture or text to a 16x2 OLED Character. This application note uses DT-AVR Inoduino as its main controller.

28-04-2014
AN214_rev2.pdf AN214.zip
[AN214] Simple Web Server menggunakan DT-AVR Inoduino dan WIZ820io

This application note will explain how to build a simple webserver. This application note uses DT-AVR Inoduino, DT-Sense Temperature Sensor, and WIZ820io.

28-04-2014
AN213_rev2.pdf AN213.zip
[AN213] Telnet Server berbasis DT-AVR Inoduino dan WIZ820io

This application note will explain how to build a simple telnet server. This application note uses DT-AVR Inoduino, DT-Sense Temperature Sensor, and WIZ820io.

18-02-2016
AN212.pdf AN212.zip
[AN212] Monitor Arus pada Motor DC dengan DT-Sense Current Sensor with OpAmp

This application note will explain how to use DT-Sense Current Sensor. This application note uses DT-AVR Inoduino, DT-I/O Quad Relay Board, and DT-Sense Current Sensor with OpAmp.

28-04-2014
AN210.pdf AN210.zip
[AN210] Temperature Logger berbasiskan DT-AVR Inoduino dengan SD Card sebagai Media Penyimpanan Data

This application note will explain how to build a temperature logger system. This application note uses DT-AVR Inoduino, DT-I/O I2C Peripheral, DT-SENSE Temperature Sensor, EMS SD/MMC/FRAM, and EMS LCD Display.

28-04-2014
AN209.pdf AN209.zip
[AN209] Library USB Controller untuk Komunikasi SPI pada DT-AVR Inoduino

In this application note we will share an Arduino library for accessing VINCULUM USB-Host Stater Kit through SPI communication. This application note uses DT-AVR Inoduino, DT-Proto Header Shield, and VINCULUM USB-Host Stater Kit.

28-04-2014
AN208.pdf AN208.zip
[AN208] Library USB Controller untuk Komunikasi Paralel pada DT-AVR Inoduino

In this application note we will share an Arduino library for accessing VINCULUM USB-Host Stater Kit through parallel communication. This application note uses DT-AVR Inoduino, DT-Proto Header Shield, and VINCULUM USB-Host Stater Kit.

07-08-2014
AN207.pdf AN207.zip
[AN207] Library USB Controller untuk Komunikasi Serial pada DT-AVR Inoduino

In this application note we will share an Arduino library for accessing VINCULUM USB-Host Stater Kit through serial communication. This application note uses DT-AVR Inoduino, DT-Proto Header Shield, and VINCULUM USB-Host Stater Kit.

28-04-2014
AN196.pdf AN196.zip
[AN196] Pemantuan Suhu dan Kelembaban Relatif Berbasis DT-AVR Inoduino dan Modul Sensor DHT11

This application note will explain how to DHT11 sensor. This application note uses DT-AVR Inoduino as its main controller and SPC Low Cost Serial LCD/OLED as display peripheral.

28-04-2014